Ignition Switch Replacement Instructions
(1995 & newer)

These instructional pages give you step-by-step instructions for the removal and replacement of the ignition lock cylinder and/or the ignition switch located in the column. These parts fail regularly. Often the switch will fail causing one or more of the electrical circuits to lose power (radio, heater, fuel pump, pass-lock system, etc.). These instructions will show you how to gain access and remove the switch and harness from the column and dash.

Estimated Time Required: 1.0 - 1.5 hrs.
Tools Needed: 7mm socket, ratchet, short extension, 10mm socket, 20 torx driver, wire cutting pliers, #4 inverted torx socket, steering wheel puller, small probe, #2 inverted torx socket, flat blade screwdriver.


Our Part # GMIGN Instructions
Fits Makes: GM, Buick, Cadillac, Chevrolet, GMC, Oldsmobile, Pontiac
Fits Years: 1995-up

$12.95